Disassembling and assembling the brake linings
Disassembling
- Detach the brake cable.
- Unscrew the nut (1), remove the washers and the
brake shoe (2).
(A) = 1 mm, (B) = 1.5 mm
Assembling
- Install the brake shoe with the washers and nuts
and tighten lightly.
- Adjust the brake shoe such that the interval (A)
from the upper edge of the wheel rim equals 1
mm and the interval (B) between the brake shoe
and the wheel rim equals 1.5 mm on both sides.
- The brake shoes must be adjusted to leave a gap
of about 0.5 mm to the wheel rim to the rear in
the direction of rotation.
- Tighten the nuts when the brake linings are
correctly adjusted.
- Attach the brake cable.
(C) = 0.5 mm
MAINTENANCE AND CARE
64
ergo_bike pedelec
B
B
A
2
1
C
