19
Main menu
1
Tour data
2
Personal settings
3
Device settings
4
Information
Personal settings
1 Limit values
1 Set the speed at which motor assistance should
cease (max. 25 km/h). When the actual speed
exceeds the limit value the speed display will
blink.
2 Heart rate; set the limit value. When the actual
value exceeds the limit value an audio signal
sounds and the heart rate display blinks.
3 Set the trip time in minutes. When the actual
trip time exceeds the limit value an audio signal
sounds and the trip time display blinks.
4 Set the trip distance you want to ride in km.
When the actual distance exceeds the limit val-
ue an audio signal sounds, and the distance
display blinks.
Displays
Main menu
1
Tour data
2
Personal settings
3
Device settings
4
Information
Device settings
1 Display
Brightness – Contrast
2 Time (important for the recording of tour data on
the memory card)
3 Date (important for the recording of tour data on
the memory card)
4 Language
5 Wheel circumference
The wheel circumference is set at the factory to
216 cm as a reference value. This menu permits
to correct this value according to total weight,
tyre air pressure, and tyre type.
6 Lock code
7 GPRS (only on bikes of the premium series, see
page 29)
8 Scan key (only on bikes of the premium series,
set the function of the scan key: "Switch dis-
play", "GPS waypoint" or "GPS photo position").
2 Display values
The display values can be set only on bikes of the
premium series (see page 16 / 1.6).
Personal settings
1
Limit values
2
Display values
Display 1
Heart rate
Temperature
Altitude above sea level
Air pressure
Incline
Cadence
OPERATING classic and premium
19
ergo_bike pedelec
