Software update with the daum update card
Since the scope of the user software is constant-
ly actualised and expanded, it is possible to bring
your device to the latest state by means of a soft-
ware update. The latest update will always be
available as an update file "update.s32" on our
internet page www.daum-electronic.de under sup-
port, or you can receive an update card directly from
daum electronic gmbh.
You can order the update card directly from daum
electronic gmbh; once the update is completed you
can use the card as a ergo_memo-card2 for a sec-
ond user.
If you prefer to update over internet, you will need
an SD card reader (available commercially or from
daum electronic gmbh) and a PC.
Save the downloaded "update.s32" file in the subdi
-
rectory \UPDATE on the ergo_memo-card2.
Software update
Requirements
If you have an
empty
memory card start here:
- Insert the empty or formatted memory card (1) in
the card slot of the dashboard (open the cover in
order to have access to insert the card).
- Wait until the card is initialised (confirmation
tune will play).
If you have a memory card that is already
initial-
ised
(the folders \DATA, \MP3, and \UPDATE exist):
- Insert the memory card into the card reader of
the computer.
- Copy the update file "update.s32" in the folder
\UPDATE on the memory card.
OPERATING classic and premium
24
ergo_bike pedelec
1
