43
This function can only be activated at < 6 km/h. If the
speed exceeds 6 km/h while pushing assistance is
active, then it will be turned off.
- Shift into first speed (gear) before activating the
pushing assistance function by pressing the key
(1).
- The pushing assistance is deactivated by pulling
one of the brake levers (2) or by pressing the
corresponding key (1).
BIKING
Driving conditions
NOTE
The motor drive of your ergo_bike pedelec is
equipped with a high-quality two-levels transmis-
sion, that lowers (demultiplies) the rotational speed
of the powerful motor to the pedalling speed range.
This ensures you an easy start in most situations.
ATTENTION
The transmission noises will diminish to a min-
imum only after a running-in distance of about
100 kilometres.
The bicycle can be used with or without switching on
the power assistance.
With the power assistance switched on you start
pedalling like with a normal bicycle. When you
start pedalling, the electric motor kicks in and helps
accelerate the bicycle. The stronger you pedal, the
stronger the motor assistance will be.
In the speed range from about 24 to 25 km/h the
motor assistance is reduced.
From about 25 km/h the electric motor is set to idle,
there only muscle energy will be available.
Pushing assistance
43
ergo_bike pedelec
1
2
