DT1400 xx xx
12
20170920-V0
5.2. Connecting the power supply and the input signal
The following figure shows the wiring plan, connecting the
DT1400 xx xx to the power supply and to the input signal:
Wiring plan, connecting
the instrument to the
power supply and to the
input signal
(see also “Application
example”)
In case of DC supply the
polarity is indifferent
Be careful the polarity of
the cables
1. Loosen terminal screws.
2. Insert the wire ends into the open terminals according to
the wiring plan.
3. Screw the terminal in.
4. Check the hold of the wires in terminals by pulling on
them firmly.
Summary of Contents for DT1400 RL2 IA
