DT1400 xx xx
20170920-V0
33
7.7. High value of scale
(05. menu item)
Function
Any optional display range can be assigned to the input
signal range (scaling). Here you can set the high value of
the desired display range.
[Factory default: 100.00. ]
Note!
For scaling the displayed value you should set the
low value also. (Previous menu item.)
Sequence of operation
1. Enter the menu with the supervisor code.
The way the code should be type in can be found in
Chapter
7.1. Typing the code in
. You see on the display:
.
2. Keep stepping by pressing the
▲
button as long as you
see this menu item:
.(
Hig
h = high value of scale).
3. Enter the menu item by pressing the
ENTER
button.
4. You will see:
on the display. The left digit is
blinking signaling that it can be modify.
5. Pressing the
►
button you can select the next digit.
6. Pressing the
▲
button you can increase the value of the
blinking digit:
,
,
,
,
,
,
,
,
,
,
, etc.
7. When the digit on the left side is selected pressing the
▲
button the sequence is as follows:
,
,
,
,
,
,
,
,
,
,
,
, etc. so you
can set any number between -9999-99999.
8. Examle: when the phisical range of the connected
transducer is: 30-1000 mbar, you have to set 1000.0:
.
Summary of Contents for DT1400 RL2 IA
