DT1400 xx xx
64
20170920-V0
9. Dismounting
9.1. Dismounting procedure
Before dismounting take note the warnings written in
Chapter
5.1.
The following figure shows the dismounting procedures:
Dismounting from the
rail
The dismounting procedure needs a screwdriver for slotted
screws.
1. Before dismounting disconnect all wires.
2. Put the screwdriver end into the fixing assembly’s hole
(figure step 1.).
3. Lift the screwdriver handle until it possible to open the
fixing assembly (figure step 2.).
4. Keeping the screwdriver in this position lift the instrument
bottom from the bottom edge of the rail (figure step 3.).
Lift the whole instrument (you may put out the screwdriver)
(figure step 4), the instrument will be free.
9.2. Disposal
According with the concerning EU directive, the
Manufacturer undertakes the disposal of the instrument that
are manufactured by it and intended to be destroyed.
Please deliver it in contamination-free condition to the site
of the Manufacturer or to a specialised recycling company.
Summary of Contents for DT1400 RL2 IA
