DATAPROCESS EUROPE S.p.A.
ST 230 USER MANUAL Pag.
20
10.2 DISPENSING MODE LABEL ROLL LOADING
This operating mode is generally used when it is required to dispense the labels (that is
detaching from silicon paper) after the printout in order to stick them manually on the
object to be labelled as indicated
in the picture on your left. In this
case the printer has to be
equipped with a label
photosensor. After the paper has
passed through the paper guides
it has to pass between the
printhead and the rubber roll as
indicated in
picture 26 on your left.
Picture 26
Take away the labels from about
400 mm of material and detach all
the labels located on the strip, as
indicated in picture 27 on your left.
Picture 27
Pass the silicon paper only under
the rubber roll as indicated in
picture 28 on your left.
