DATAPROCESS EUROPE S.p.A.
ST 230 USER MANUAL Pag.
11
As the colours of the cores in the mains lead of this equipment may not correspond
with the coloured marking identifying the terminals in your plug, proceed as follows:
•
The core which is coloured green and yellow must be connected to the terminal in
the plug which is marked with letter "E" or by the earth symbol
, or coloured green and yellow.
•
The core that is coloured blue must be connected to the terminal that is marked
with letter "N" or coloured black.
•
The core that is coloured brown must be connected to the terminal that is marked
with letter "L" or coloured red.
7.2 REAR PANEL, CONNECTION
Connect the printer with the
standard supplying cable, fol-lowing
instructions in para-graph 7.
To interface the printer to an
external driving device (PC, etc.)
use a serial cable with connector
(type D, 9 pin male). See appendix
A for the pin number of the serial
cable.
Before switching the device
ON
press the switch button (when
Picture 6
off it shows one red
"O"
), verify that the cable is correctly
inserted as described on paragraph 7.
Picture 6 shows the rear panel and its connections.
POWER SWITCH
SERIAL CABLE
POWER CORD
