DATAPROCESS EUROPE S.p.A.
ST 230 USER MANUAL Pag.
10
7
ELECTRICAL CONNECTIONS
The power cable of the printer has a female connector on one side and on the opposite pole
a spindle type
"SCHUKO".
To provide a correct and safe
connection to the electrical network
follow the here below instructions,
as indicated on picture 5 on your
left:
1. Insert the female connector into
the proper plug mounted on the
rear panel of the printer.
Picture 5
2. Connect the spindle "SCHUKO" to an appropriate socket outlet with following voltage:
220 VAC +10% - 15% - 50/60 Hz.
The following voltages : 110 VAC and 240 VAC 50/60 Hz as per required
WARNING:
Be sure that the power cord is connected to an electri-
cal installation with proper earthing.
Such electrical installation as per CEE safety rules.
7.1 NOTICE FOR CUSTOMERS IN THE UNITED KINGDOM
WARNING:
If the plug supplied is not suitable for the socket outlets
in your factories, it should be cut off and an appropriate
plug fitted in accordance with the following instruction:
IMPORTANT: The wires in these mains lead are coloured in accor-
dance with the following code:
•
GREEN and YELLOW
:
EARTH
•
BLUE
:
NEUTRAL
•
BROWN
:
LIVE
1
2
