DATAPROCESS EUROPE S.p.A.
ST 230 USER MANUAL Pag.
17
10 LABEL ROLL LOADING PROCEDURE
Open the covers, lift the printhead and take off the printhead following the instructions in
paragraph 8.
Take the black flange away from the roll
holder as indicated in picture 18 on
your left.
Picture 18
Insert the labels roll on the roll holder,
as indicated in picture 19 on your left.
Picture 19
Take the strip of labels and let it pass
through under the black magnet brake
and adjust the width of the paper guide
to adapt it to the label width, turning the
knurled knob clockwise or
anticlockwise to widen or stretch the
device as indicated in picture 20 on
your left.
Picture 20
