DATAPROCESS EUROPE S.p.A.
ST 230 USER MANUAL Pag.
22
11 FINAL OPERATIONS
After installing the labels following
one of the above - mentioned
modes or a new thermal transfer
ribbon the operator has to reinstall
the cartridge (in case it has been
taken off, only for inked ribbon
installing), being careful to insert all
the three guides on the appropriate
housings as indicated in picture 32
on your left.
Turn the knurled knob anti-
clockwise to lock on its housing.
Picture 32
Lower the printhead and repo-
sition it in printing position, turning
the black knob anti-clockwise as
indicated in picture 33 on your left.
Picture 33
WARNING: Be careful not to put fingers between printhead and
rubber roll.
