Datapath Q Series, Instructions For Use Manual, Page: 95 / 104

Q-Series Alarms
95
DC power connected DC Power is now connected.
DC power disconnected DC Power has been interrupted.
AC power connected AC Power is now connected.
AC power disconnected AC Power has been interrupted.
In valid pointing solution The pointing solution is invalid. If you continue, you must
complete the pointing without the aid of a calculated pointing
solution.
Compass calibration failed Magnetic compass calibration failed because of invalid GNSS
compass heading.
LNB current too low LNB current too low.
Resolved: LNB current too low LNB current is within limits.
LNB current too high LNB current is too high.
Resolved: LNB Current Too High LNB current is within limits.
Critical Error A critical error has occurred. Please download the EventLog via
the Q-Series Administration Tool and send it to the DataPath
Service Department.Log message:
Warning An error has occurred. Please download the EventLog via the
Q-Series Administration Tool and send it to the DataPath
Service Department.Log message:
Controller inner fan speed error Controller inner fan speed is below threshold. There is a risk
that the fan is obstructed.
Resolved: controller inner fan speed
error Controller inner fan speed is above threshold.
Controller outer fan speed error Controller outer fan speed is below threshold. Make sure the fan
is running and is not obstructed.
Resolved: controller inner fan speed
error Controller inner fan speed is above threshold.
Controller outer fan speed error Controller outer fan speed is below threshold. Make sure the fan
is running and is not obstructed.
Resolved: controller outer fan speed
error Controller outer fan speed is above threshold.
Magnetic compass calibration result Magnetic compass calibration was successful.
Altitude too high Altitude is above 3000 m.
Resolved: altitude too high Altitude is within operational limits.
MISSING RESOURCE No setup selected.
List of Q-Series Alarms
Part/Procedure Description