Datapath Q Series, Instructions For Use Manual, Page: 10 / 104

Safety Instructions Q-Series
10
tion angle. Use the diagram below to determine safe distances from the front of the antenna,
based on the elevation angle.
Figure 1: Safety Distance Vs. Elevation Angle, X- Ku- and Ka-band
Fire
In the event of fire close to or in the Q-Series, use carbon dioxide extinguishers
Mechanical Risks
Cables between the Q-Series and its external units increase the risk of someone tripping over
them.
Also, the Q-Series has moving parts that increase the risk of injuries from crushing. Always
use care to prevent injuries during operation.
Safety Covers
Where applicable, parts or modules used in the Q-Series are protected by covers, both in
order to reduce environmental intrusion, and to increase safety for the user.
The Transceiver unit is equipped with a plastic cover, in part due to the heat generated by the
unit when operating.
WARNING
Transportation and Handling
Transportation and handling of the Q-Series system should be conducted with care.
The amplifier part (HPA) can become very hot! The unit is equipped with a heat sink
to dissipate generated heat. This heat sink can become very hot and should not be
touched.
The safety covers should only be removed by qualified personnel.