Datapath Q Series, Instructions For Use Manual, Page: 36 / 104

Q-Series Admin Tool Q-Series
36
5. In the Settings screen, click on the Ethernet Settings button.
6. If connecting to a DHCP network, in the Ethernet Settings screen, set the DHCP button to ON .
NOTE
This step is only to be performed when connecting the Q-Series to a network. When
connecting a computer directly to the Q-Series, a static IP address needs to be set.
To set a static IP address, turn off DHCP and manually enter the desired IP address
(and, if required, a Netmask and Gateway), and click
Apply .
7. Click Apply at the bottom of the screen.
8. Click Done in the next screen.
9. In the Admin screen, click on the right navigation arrow.
10. Write down the terminal's IP address.