Datapath Q Series, Instructions For Use Manual, Page: 37 / 104

Q-Series Q-Series Admin Tool
37
11. Step back using the navigation arrows until you reach the Start screen.
Accessing the Q-Series WEB Based Admin Tool
Prerequisites
• Make sure the Web Server is running, see “Starting the Web Server” on page 35.
• Write down the IP address, See step 10 on page 36.
Procedure
1. Assuming the Q-Series is running and connected to the network, connect a computer to that
same network.
2. Open a web browser, and go to the unit's IP address, followed by port 27015, e.g.
192.168.138.1:27015
NOTE
When using Internet Explorer (IE), the IP address needs to be input including the
protocol (https://), i.e.
https:// 192.168.138.1:27015 . For other browsers, only the IP
address including the port will suffice.
The Q-Series Admin Tool page will now be displayed.
Home Tab
The Home tab (Figure 10) provides an overview of the main system settings: