Datalogic Rhino 10, User Manual

Page: 34 / 40

User Manual Rhino™ 10
SAFETY REGULATIONS
NOTE
Read this manual carefully before performing any type of connection
to the Rhino™ 10 v
ehicle computer .
The user is responsible for any damages caused by incorrect use of
the equipment or by inobservance of the indication supplied in this
manual.
General Safety Rules

Use only the components supplied by the manufacturer for the specific Rhino™ 10 being used.

Do not attempt to disassemble the Rhino™ 10 vehicle computer, as it does not contain parts that can be re-
paired by the user. Any tampering will invalidate the warranty.

Do not submerge the Rhino™ 10 in liquid products.
For further information, refer to this manual and to the Datalogic Mobile web site: www.mobile.datalogic.com .
When using a Power Supply
This device is intended to be connected to a UL Listed/CSA power supply which supplies power directly to the Rhino™
10 rated 12 – 50 VDC, min 20W max 60W
, which supplies power directly to Rhino™ 10. For other power sources refer
to the wiring diagram for the power cable.
CAUTION
RISK OF EXPLOSION IF BATTERY IS RE-
PLACED BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORD-
ING TO THE INSTRUCTIONS.
Product Safety
Rhino™ 10 is compliant to IEC 60950-1:2005, 2nd Ed and EN 60950-1:2006 + A11 standards
Radio Compliance
CAUTION
Use only the supplied or an approved replacement
antenna. Unauthorized antennas, modifications or
attachments could damage the product and may
violate laws and regulations.
CAUTION
Most modern electronic equipment is shielded
from RF signals. However, certain electronic
equipment may not be shielded against the RF
signals generated by Rhino™ 10.
30