User Manual
Rhino™ 10
3. Select the tab for the port you want to use. Set the parameters to match the device you are connecting.
Termination characters are stripped from the data sent by the scanner and new termination characters are added as
defined in the checkboxes. These settings are common for all ports.
You can check the configuration by sending data from your device (scan a label). If the data is received with no errors
it is shown in the Test Data text box. If there were errors when receiving the data, the error will be shown next to the
Baud Rate drop down for the Serial Ports and below the Devices list box for Bluetooth. Framing errors usually indicate
an incorrect baud rate setting.
4. Once you have successfully configured the ports click Save to save your setup parameters. At this point the
dialog will be closed and a white icon will be in the system tray.
If you want to change the configuration, simply tap on the system tray icon to open the configuration dialog box.
If you want to disable ScanWedge, select “Disable” in the baud rate dropdown in both COM tabs, uncheck “Enabled”
on the Bluetooth tab and SAVE. A confirmation dialog will ask if you really want to disable ScanWedge. ScanWedge
will not restart on the next boot, but remain disabled.
8
Summary of Contents for Rhino 10
Page 1: ...RhinoTM 10 User Manual ...
