USING THE BC9600 BASE STATION
PRODUCT REFERENCE GUIDE
17
USING THE BC9600 BASE STATION
The BC9600 base station, when paired with one or more PowerScan™ PM/PBT9600
readers, builds a Cordless Reading System for the collection, decoding and transmission
of bar code data. It can be connected to a Host PC via RS232, USB, USB Type C, or Ether
-
net, depending on the interchangeable connection module.
With the adoption of the Wireless Power Transfer technology, the base station can
charge the battery of the gun without contacts, with a performance depending on the
power supply type used.
The label on the base station has LED indicators and a touch button. Touch the button
for 2 seconds and all properly configured and switched on scanners (with battery profile
different from Max Autonomy) that are linked to that base station and within the radio
range coverage, will emit a beep and blink within 5 seconds. This feature is useful to:
• verify which scanners are linked to a particular base station;
• detect a scanner forgotten somewhere.
The LEDs signal the BC9600 status, as explained below.
LED
STATUS
Green LED
Solid green: the base station is powered.
Blinking: the base station is receiving data
Lateral Light
Bands
Indicates the state of the battery charge.
Orange slow blinking: battery level is under
50%, the reader is charging.
Green slow blinking: battery level is over 50%,
the reader is charging.
Solid Green: the battery of the reader is fully
charged
Ethernet
(
Ethernet models only
)
BF LED (red/green): network status;
LINK LED (yellow/green): link activity;
SF LED (red/green): module status;
PWR LED (green): power ON (located on the
connection module this LED is not visible when
installed in the cradle).
