Datajack Overdrive Pro, User Manual

Page: 9 / 85

9
Using the Power Button to Determine the Device State
Power Button Description Your action
Not lit
The device is turned off.
To turn the device on, press and hold
the power button for two seconds.
The device is turned on, but the LED is
turned off.
Optionally, turn on the LED.
Lit, flashing
(approximately every 4 seconds)
The device is turned on, and the LED is
turned on.
No action required.
Lit, flashing
(approximately every 8 seconds)
The device is in standby (low power)
mode.
The following are off: LCD, Wi-Fi radio,
3G/4G radios.
To exit standby mode:
Connect the device to the AC charger
or computer through the micro-USB
cable.
— or —
Press the power button.
Controlling the Device Using the Power Button
Type of press Result
Quick press
Removes device from standby (low power) mode.

Wakes up (turns on) the LCD if the LCD was enabled but dormant. (The LCD
turns dark, after a configurable time of inactivity.)

Confirms or acknowledges a displayed message.

Turns off display of the Wi-Fi network name and password.
Quick double-press

Wakes up (turns on) the LCD if the LCD was enabled but dormant. (The LCD
turns dark, after a configurable time of inactivity.)

Briefly displays the Wi-Fi network name and password. (See ―Wi-Fi Password
Reminder‖ on page 56.)

Displays the next LCD information screen, if available. (See ―LCD Information
Screens‖ on page 14.)