Datajack Overdrive Pro, User Manual

Page: 39 / 85

39
 Update Firmware from File — You can upgrade the device firmware from a file.

Standby Timer on Battery and On AC Power — You can enable standby (low power) mode.

TRU-Install — This feature installs the necessary drivers the first time you connect your device to your
Windows or Mac computer through the micro-USB cable.
 Check for Updates and Check for updates now — You can check for updates to your device.
Display Panel
From the
Display panel of the Device tab, you can configure settings for the device LCD. To access this panel:
1. Log in to the home page.
2. Click Advanced settings .
3. Click Device > Display .
From this window, you can view or adjust these settings:
 Power Button LED — You can enable the power button light on the device.

LCD Backlight — You can turn the LCD on or off.

Turn Off Backlight — This setting specifies how soon the LCD goes dormant.

Backlight Settings — You can adjust the brightness of the LCD.
microSD Card Panel
1. Log in to the home page.
2. Click Advanced settings .
3. Click Device > microSD Card .
From this window, you can view or adjust
these settings, or perform the following actions:
 Status — This field reflects the status of the microSD card slot (for example, the slot is disabled, or a
card is detected).

SD-Card Slot — Before you can use the microSD Card Slot, you must enable it.
 microSD Shared Folder Name — This is the name of the folder that the microSD card shows up as (in
the file browser program).

Username and Password Security — You can specify whether a username and password are required
to access the microSD Card.
 Guest Username — This is the username that non-administrators must enter before using the card.
 Guest Password — This is the password that non-administrators must enter before using the card.