63
Your 3G and 4G account information is not affected; after reset, the device remains provisioned for
service.
You’ll need to reset the software to default settings if:
You’ve forgotten the administrator password.
You’ve changed the DHCP settings such that the device is inoperable (for example, there’s no
communication with the device).
You have two options to initiate the reset:
Through the software.
Through the reset button on the device.
Resetting the Software to Default Settings
(Through the Reset Button)
1.
Using slight thumb pressure, slide the battery compartment
cover upward to remove it.
2.
Locate the small hole near the battery compartment. The reset
button is inside this hole.
3.
Insert a thin object (for example, the end of a paper clip) into
the hole, and press down
for five or more seconds
.
4.
Replace the battery compartment cover.
5.
Check the device LCD. If it displays ―Reset to factory defaults?
Press the power button to accept,‖ press the power button on
the device.
6.
Follow the instructions on the device LCD.
Summary of Contents for Overdrive Pro
Page 1: ...1 ...
