Manual Datafox ZK-MasterIV
3.5.8.6 WLAN configuration via the DatafoxStudioIV
3.5.8.6.1 General
The program WLANConfig can set the TCP/IP and the WLAN settings of the MatchPort via RS232.
These settings can be saved as a file and the data of this file can be transmitted to the device. The depen-
dencies of the single parameters among each other are permitted or locked by the program automatically.
Four dialogues are provided for working with the program.
WLAN settings (main dialogue)
Selection of the serial interface (COM settings)
Selection of the configuration file (Select INI-File)
TCP/IP settings (Terminal TCP/IP settings)
3.5.8.6.2 Selection of the serial interface
Via this dialogue you can select the in-
terface of the PC, to which the MasterIV
terminal is connected. Usually a baud
rate of 38400baud is set, which has to cor-
respond to that one of the terminal. You
start the dialogue by pressing the button
COM settings.
Figure 42: Selection of the serial interface
Version: 04.01.07.00
Page
57
www.datafox.de