Manual Datafox ZK-MasterIV
module or the access master with a reference to the reader table on which the digital input is to be
supervised. The second value gives the number of the digital input. The third value is a reference to
the action table; this action is carried out if the level of the digital input changes. The forth and last
value is a reference to the time table for setting the time model which is valid for the execution of the action.
Even if you do not need the holiday and event table, they have to be generated as *.txt files (empty) and
be transmitted to the device together with the other files.
If you have paid attention to the construction and configuration instructions and their hints, you can
transmit the lists (tables or text files) to the ZK-MasterIV with a standard setup for the access control
and test them.
3.7 Timing of the digital exits for the MasterIV device series
It is possible to time the digital outputs of the MasterIV device series via tables. Thus, for example a
turn down of the heating system at nigh, a buzzer control and much more can be realized.
Caution:
In order to use the timing of the digital exits, the firmware version 04.01.01.17 (or
higher) has to be installed on the terminal.
The following tables have to be configured:
A
ction
R
eader
T
ime
Version: 04.01.07.00
Page
86
www.datafox.de