Datafox KYO Inloc, Manual

Page: 113 / 157

Manual Datafox KYO Inloc page 106 date: 16.12.2020 Version: 04.03.15.XX
5.7.10.5. Special case: Relays operated by time model
Despite a time model being active, the RFID reader will detect and read RFID transponders. The
Elapse time associated to the action may overlap with the time model’s activity period.
A conflict will occur if the door is opened before the time model
expires. I this case the reader’s LED
is set to white. The relay does not toggle there and switches when the time model expires.

Please Note:
The reader’s LED is not set to green if a time model sets the relay. When granting access
due to an RFID transponder the LED is set to green only for 3 seconds, not for the elapse
time associated to the action. This is the standard behaviour for granting access.
5.7.10.6. Configuration sample
The sample configuration explained here is associated to Figure 1. The digital input 1 is used to de-
tect the opening of the door. A low voltage on the digital input indicated that the door is open.
5.7.10.7. Access control lists
First the two devices are declared by entries to the Reader list. ID 10 is associated to the RFID
reader, which is present next to the door. ID 99 identified the access controller.
Reader.txt
ID ZM TM RefLocation RefAction PinGeneral
10 1 010 1 100 0
99 1 320 1 0 0
The list Action2 contains the operations for opening the door. Entry 100 will be evaluated when
reader ID 10 identified an RFID transponder that is allowed to open the door. The action sets relay 1
at the access controller for 10 seconds. Simultaneously the green LED is activated at reader ID 10.
Action2.txt
ID
Ref
Grou
p
Ref
Time
Ref
Reader
Relais
PortOut Elapse
Ref
Reader
Led Ref
Time
Relais
100 0 1 99 1 10 10 0