Datafox KYO Inloc, Manual

Page: 64 / 157

Manual Datafox KYO Inloc page 57 date: 16.12.2020 Version: 04.03.15.XX
5.7.2. Description of Tables for Access Control 2
Table
Reader (List of all devices installed in the system)
Name
Data type Length Description
ID
Number
(int)
4 Unique Key (value>0) of the Reader table.
ZM
Number
(int)
4
In our example, it has number 1. If there are several PZE-MasterIVs in an ac-
cess system, they can be depicted in one table connection and it is not neces-
sary to have a separate string for each PZE-MasterIV.
If several RS485 bus lines are used on a device, each additional line must be
entered with Master ID + 1.
TM
Number
(int)
3
Contains two information in one number. Both figures on the left ( 01 0) indicate
the bus number of the door module, the figure on the right (01 0 ) contains infor-
mation about the type of connection. A 0 means a connection via RS485, a 1
stands for a connection via RS232 or RS485 as stub.
RefLocation
Number
(int)
4 Indicates which room is supervised by the reader.
RefAction
Number
(int)
4 Indicates which action is worked through after a successful check.
PinGeneral
Number
(int)
8
Can contain a numerical sequence by which a person without a card gets ac-
cess.
Table
Identification (list of all devices installed in the system - master and door modules)
Name
Data type Length Description
ID
Text
(ASCII)
20
Contains the ID card no. which is read at the TMR33 device or terminal. An ID
card can occur several times (is assigned to several authority groups).
Group
Number
(int)
4 Assigns the ID card to an authority group.
Pin
Number
(int)
8
Activates a PIN request if not equal 0. Please note that a PIN must not start
with zero. 0815 would be invalid.
Menace
Number
(int)
4
Activates (if not equal 0) a "‘menace-PIN"’ that can be added to the PIN. If en-
tered, the system sends a data record that can be analyzed by software devel-
oped for this purpose and sets off the alarm.
ActiveStart
Text
(Date)
10
The tag entered here indicates the start date of the validity of the ID card.
(for example 2007-07-12 = yyyy-mm-dd)
ActiveEnd
Text
(Date)
10
The tag entered here indicates the end date of the validity of the ID card. (for
example 2007-07-12 = yyyy-mm-dd)
ActiveGeneral
Number
(int)
1
Activates or deactivates this card record.
0 = card blocked
1 = card active
2= virtual card (use only via DLL)
3 = access only by entering the PIN; field ID are now only a PIN for access.
4= pin = threat code i.e. the threat code is used instead of the Pin entered.
7= Burglary alarm system, allowed to switch on/off
8 = general authority (with PIN request)
9 = general authority (no PIN request)