Datafox KYO Inloc, Manual

Page: 33 / 157

Manual Datafox KYO Inloc page 26 date: 16.12.2020 Version: 04.03.15.XX
5.3.4.2. Communication TCP / IP via wLAN / Wifi
This overview shows you which WLAN methods are supported.
- Not supported is WPA (Predecessor of WPA2).
- Not supported is multiple-input multiple-output (MIMO)
- Not supported 5 GHz connections and no mixed operation 2.4 GHz / 5 GHz
- Not supported Authentication via WPA2 Enterprise according to IEEE 802.1x
!
Attention:
We cannot test every available Access-Point on the market.
Therefore, it is not possible for us to guarantee a connection to any AP.
!
Attention:
multiple-input multiple-output (MIMO) are not supportet. If you switch the access-Point
AP from b/g/n to b/g, use the access-Point only SISO.
https://en.wikipedia.org/wiki/Single-input_single-output_system
When setting the encryption AES or WEP, only one type is used at a time.
The setting AES+WEP means for some access points that AES encryption is performed first and
then additionally encrypted with WEP.
In this case, only set AES.
Security:
None (0)
ohne
Security:
WEP(1)
WEP64
WEP128
Authentication
Open/None (0)
Shared/PSK (1)
NO Key
WLAN / Wifi
– overview about
the encriptions and
„Infrastructure“
Encryption
Security:
WPA2/802.11i
AES / CCMP
„AES 128“
AES / CCMP +
WEP
Authentication
Shared/PSK
Encryption