Datafox KYO Inloc, Manual

Page: 138 / 157

Manual Datafox KYO Inloc page 131 date: 16.12.2020 Version: 04.03.15.XX
5.7.16.8. Optical and acoustic signals of the U&Z door handle
function sounds Optical signals
Sleep mode
Begin programming mode
– O
End programming mode
O
–
Badge trained
O O

Badge deleted
– –

After wake-up - read mode

Badge not authorized
–

Badge authorized

Reset
–  
Battery warning Phase1
O O O O O

Battery warning Phase2
O O O O O
 

=
red lights up

= red flashing

=
green lights up

= green flashing
-
= long low tone
O
= short beep
5.7.16.9. Resetting the U&Z locking cylinder
1.) The knob module must have been taught out in the ra-
dio module.
2.) Hold the service key in front of the knob module for the
duration of a programming mode (15 seconds) and repeat
the procedure within 60 seconds. At the end of the second
programming mode, this deletes all badges (incl. battery
change and disassembly card) except for the
Servicekey. (A+B)
3.) The existing badges can then be re-learned as de-
scribed in section 9.1.
Here, the first ID card held is used for the
battery change card and the second to the disassem-
bly card.