DM16E1 / DM4E1 Operation and Installation Manual - 204-4001-19
49
5.7.1. Configuration
The V.35 tributary is set at the equipment slot 4. The screen below shows the configuration menu for this
tributary (/settings/ports/V.35).
#
-------------------------------------------------------------------------
#
DataCom Telematica - DM16E1 Multiplexer
#
/local/settings/ports/V35
#
-------------------------------------------------------------------------
#
Card Settings
#
Slot 4 - Port 01 - V.35 Interface
#
#
Alarms :[ Disable ]
#
Tests :[ Disable ]
#
CT105 :[ Forced On ]
#
CT108 :[ Forced On ]
#
Clock :[ CT115 ]
#
CT128 :[ Disable ]
#
Clock Phase :[ Normal ]
#
Rate ( Nx64 kbit/s ) :[32]
#
#
#
#
#
-------------------------------------------------------------------------
#
<ENTER> Save and Exit <ESC> Exit <SPACE/TAB> Change
#
<PgUp> Pre[V]ious Card [N]ext Card <PgDn>
#
-------------------------------------------------------------------------
The V.35 interface configurations include:
•
Alarms: Enables alarm generation by the port. Alarm generation is dependent on signal enabling.
Alarm conditions:
−
Loss of CT113 or CT128 clock configured.
−
CT105 or CT108 disabled (off).
•
Tests: Enables activation of tests at the interface.
•
CT105 and CT108: External signals received by the DTE. Can be set to Controlled or Forced ON.
•
Clock: Identifies the clock used as reference for CT103.
−
2048kHz E1 AIS Ref. Clock: Uses the 2048 kHz clock for AIS emission in case of failure. This
clock is selected in the general equipment configurations. See chapter Table 5 for more information.
