DM16E1 / DM4E1 Operation and Installation Manual - 204-4001-19
34
#
-------------------------------------------------------------------------
#
DataCom Telematica - DM16E1 Multiplexer
#
/local/status
#
-------------------------------------------------------------------------
#
Choose Status view
#
#
0 - Equipment
#
1 - Slot AG1 - E3 SM Short Range Bidirectional 1310nm
#
2 - Slot AG2 - E3 Eletric
#
3 - E1 tributary Ports (16)
#
4 - V.35 Interface
#
5 - Empty Slot
#
6 - Router (2)
#
#
#
#
#
#
#
Option: [ ]
#
-------------------------------------------------------------------------
#
<ENTER> Refresh <ESC> Exit
#
-------------------------------------------------------------------------
3.12.1. Device Status
The equipment status menu is showed on the screen below.
#
-------------------------------------------------------------------------
#
DataCom Telematica - DM16E1 Multiplexer
#
/local/status/equip
#
-------------------------------------------------------------------------
#
Equipment Status
#
#
Up Time :[ 0d 01h 06m 23s ]
#
Backup State :[ Failure ]
#
Aggregate Link Error Ratio :[ FrameLoss ]
#
Latched Alarms :[ High priority alarm ]
#
Current Alarms :[ High priority alarm ]
#
Alarm Output :[ ALARM ]
#
Current Tests :[ No active tests ]
#
Power Supply [Main] [Backup] :[ Ok ] [ Not Present ]
#
2048kHz E1 AIS Reference :[ Internal ]
#
2048kHz External Clock Status :[ Clock Error (ignored) ]
#
External Alarm 1 :[ Disabled ]
#
External Alarm 2 :[ Disabled ]
#
External Alarm 3 :[ Disabled ]
#
-------------------------------------------------------------------------
#
Reset latched [A]larms Ac[K] Alarm Semi-Automatic [B]ackup return
#
<ENTER> Refresh <ESC> Exit
#
-------------------------------------------------------------------------
Possible status options:
•
Up Time: Indicates how long the device has been on since last resetting.
•
BackUp State: Indicates how the link protection for the main aggregate (MAIN) is acting. If the
protection is off, this field will always indicate the use of the main channel (Using Main).
−
Common values for all topologies:
o
Using Main: The data are passing through the main aggregate link (MAIN).
o
Failure: Fail in main and backup link.
−
Specific value for Point to Point topologies (Point to Point):
o
Using Backup: The device is using the data provided from the protection link (BACKUP).
The aggregates are operating in redundant transmission.
−
Values for Ring topologies:
o
Using Ring Backup: Indicates that, due to a failure in the main link, the device is using
data provided by the protection ring (BACKUP ring).
