DataCard SD Series, User Manual, Page: 28 / 106

16 Using the System
Down Arrow, Up Arrow, and Enter Key
Use the arrow keys to move through the printer menu system, and the E
NTER
key
to make a selection.
Press the up or down arrow key while the LCD panel displays
Ready
to display
additional information about the printer on line 2, including the firmware version,
printer model, serial number, and network IP address or USB IP address. The
SD460 laminating system also displays the laminator firmware version and the
laminator serial number. If you don’t press a key for 30 seconds, the LCD panel
returns to the default
Ready
message.
Ribbon Light
The ribbon indicates the status of the print ribbon in the printer. Indicators
include the following:
Card Light
The card light indicates the status of cards in the printer. Indicators include the
following
:
Off The print ribbon is okay.
Blinking amber A blinking light indicates one of
the following:
•
The printer problem applies
to the print ribbon.
•
The print ribbon is low.
•
The print ribbon is out.
Off Cards are okay.
Blinking amber A blinking light indicates either of
the following:
•
No card is detected for the
print job. Insert a card to
continue printing.
•
Scheduled printer cleaning is
due. Insert a cleaning card
now, or set aside time to run
a cleaning card.