DataCard SD Series, User Manual

Page: 83 / 106

SD Series Card Printers User’s Guide 71
197: Laminator entry card problem
The card is not where it should be in the laminator.
1.
Open the laminator.
2.
Turn the knob to remove the card.
3.
Close the laminator.
198: L1 area card problem
The card is not where it should be in the laminator.
1.
Open the laminator and remove the L1 supply cartridge.
2.
Turn the knob to remove the card.
3.
Replace the supply cartridge and close the laminator.
199: L2 area card problem
The card is not where it should be in the laminator.
1.
Open the laminator and remove the L2 supply cartridge.
2.
Turn the knob to remove the card.
3.
Replace the supply cartridge and close the laminator.
200: Laminator exit card problem
The card is not where it should be in the laminator.
1.
Open the laminator.
2.
Turn the knob to remove the card.
3.
Close the laminator.
201: L1 supply problem
The L1 supply is not moving properly. To try another card:
1.
Open the laminator and remove the L1 cartridge.
2.
Reposition, repair, or replace the supply and advance the repaired area one
full turn.
3.
Replace the cartridge and close the laminator.