1.4 Warning against Uninteded Start
1.
The motor can be brought to a stop with bus
commands while the frequency converter is
connected to mains. These stop functions do NOT
provide protection against unintended starts.
2.
While parameters are being changed, there is a
risk that motor starts.
3.
Electronic faults in the frequency converter and
cease of
•
temporary overload
•
faults in supply mains, or
•
fault in the motor connection
can cause an unintended start.
WARNING
ELECTRICAL HAZARD
Touching the electrical parts may be fatal - even after
the equipment has been disconnected from mains.
Safety
Operating Instructions
MG90U302
Danfoss A/S © Rev. 2014-02-27 All rights reserved.
5
1
1
Summary of Contents for VLT PROFINET MCA 120
Page 2: ......