9.3 Active Filter Parameter Lists
9.3.1 Default settings
Changes during operation:
”TRUE” means that the parameter can be changed while the active filter is in operation and “FALSE” means that the unit
must be stopped before a change can be made.
4 set-up:
'All set-up': the parameter can be set individually in each of the four set-ups, i.e., one single parameter can have four
different data values.
’1 set-up’: the data value will be the same in all set-ups.
SR:
Size related
N/A:
No default value available.
Conversion index:
This number refers to a conversion figure used when writing or reading using an active filter.
Conv.
index
100
75
74
70
67
6
5
4
3
2
1
0
-1
-2
-3
-4
-5
-6
Conv.
factor
1
3,600,00
0
3,60
0
60
1/60 1,000,0
00
100,00
0
10,00
0
1,000 100
10
1
0.1
0.01 0.001 0.000
1
0.00001 0.00000
1
Table 9.1 Conversion Index
Data type
Description
Type
2
Integer 8
Int8
3
Integer 16
Int16
4
Integer 32
Int32
5
Unsigned 8
Uint8
6
Unsigned 16
Uint16
7
Unsigned 32
Uint32
9
Visible String
VisStr
33
Normalized value 2 bytes
N2
35
Bit sequence of 16 Boolean variables
V2
54
Time difference w/o date
TimD
Table 9.2 Data Type and Description
Appendix A - Parameters
VLT
®
AutomationDrive FC 302 Low Harmonic Drive
132–630 kW
112
Danfoss A/S © Rev. 04/2015 All rights reserved.
MG37A322
9
9
