•
Manually reset the frequency converter or active
filter after a fault when auto-reset is inactive.
NOTICE!
For commissioning via PC, install the MCT 10 Set-up
Software. The software is available for download (basic
version) or for ordering (advanced version, order number
130B1000). For more information and downloads, see
www.danfoss.com/BusinessAreas/DrivesSolutions/Software
+MCT10/MCT10+Downloads.htm
5.3.2 LCP Layout
The LCP is divided into 4 functional groups (see
).
A. Display area
B. Display menu keys
C. Navigation keys and indicator lights (LEDs)
D. Operation keys and reset
130BD512.10
Auto
on
Reset
Hand
on
Off
Status
Quick
Menu
Main
Menu
Alarm
Log
Back
Canc
el
In
fo
OK
Status
1(1)
0.00 kW
Off Remote Stop
0.0Hz
On
Alarm
Warn.
A
0.00 A
0.0 %
B
C
D
2605 kWh
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
Figure 5.1 Local Control Panel (LCP)
A. Display area
The display area is activated when the frequency converter
receives power from mains voltage, a DC bus terminal, or
an external 24 V DC supply.
The information displayed on the LCP can be customised
for user application. Select options in the
Quick Menu
Q3-13 Display Settings
.
Callout Display
Parameter number
Default setting
1
1.1
0-20
Reference %
2
1.2
0-21
Motor current
3
1.3
0-22
Power [kW]
4
2
0-23
Frequency
5
3
0-24
kWh counter
Table 5.2 Legend to
, Display Area
(Frequency Converter Side)
B. Display menu keys
Menu keys are used for menu access for parameter set-up,
toggling through status display modes during normal
operation, and viewing fault log data.
Callout
Key
Function
6
Status
Shows operational information.
7
Quick Menu Allows access to programming
parameters for initial set-up instructions
and many detailed application
instructions.
8
Main Menu Allows access to all programming
parameters.
9
Alarm Log
Displays a list of current warnings, the
last 10 alarms, and the maintenance log.
Table 5.3 Legend to
, Display Menu Keys
C. Navigation keys and indicator lights (LEDs)
Navigation keys are used for programming functions and
moving the display cursor. The navigation keys also
provide speed control in local (hand) operation. There are
also 3 frequency converter status indicator lights in this
area.
Callout
Key
Function
10
Back
Reverts to the previous step or list in the
menu structure.
11
Cancel
Cancels the last change or command as
long as the display mode has not
changed.
12
Info
Press for a definition of the function being
displayed.
13
Navigation
keys
Press to move between items in the menu.
14
OK
Press to access parameter groups or to
enable an option.
Table 5.4 Legend to
, Navigation Keys
Start-up and Functional Tes...
VLT
®
AutomationDrive FC 302 Low Harmonic Drive
132–630 kW
54
Danfoss A/S © Rev. 04/2015 All rights reserved.
MG37A322
5
5
