MCT 10 has been designed as an easy to use interactive tool for setting parameters in our frequency converters. The software can be downloaded from
the internet site
http://www..com/BusinessAreas/DrivesSolutions/Softwaredownload/DDPC+SProgram.htm
.
The MCT 10 set-up software will be useful for:
•
Planning a communication network off-line. MCT 10 contains a complete frequency converter database
•
Commissioning frequency converters on line
•
Saving settings for all frequency converters
•
Replacing a frequency converter in a network
•
Simple and accurate documentation of frequency converter settings after commissioning.
•
Expanding an existing network
•
Future developed frequency converters will be supported
MCT 10 set-up software supports Profibus DP-V1 via a Master class 2 connection. It makes it possible to on line read/write parameters in a frequency
converter via the Profibus network. This will eliminate the need for an extra communication network.
Automation VT Drive FC322
Instruction Manual
7 How to Operate the Frequency Converter
MG.20.U1.22
71
7