7 How to Operate the Frequency Converter
7.1 Ways of Operation
The frequency converter can be operated in 3 ways:
1.
Graphical Local Control Panel (GLCP), see 6.1.2
2.
Numeric Local Control Panel (NLCP), see 6.1.3
3.
RS-485 serial communication or USB, both for PC connection, see 6.1.4
If the frequency converter is fitted with fieldbus option, please refer to relevant documentation.
7.1.1 How to Operate Graphical LCP (GLCP)
The following instructions are valid for the GLCP (LCP 102).
The GLCP is divided into four functional groups:
1.
Graphical display with Status lines.
2.
Menu keys and indicator lights (LED's) - selecting mode, changing parameters and switching between display functions.
3.
Navigation keys and indicator lights (LEDs).
4.
Operation keys and indicator lights (LEDs).
Graphical display:
The LCD-display is back-lit with a total of 6 alpha-numeric lines. All data is displayed on the LCP which can show up to five operating variables while in
[Status] mode.
Display lines:
a.
Status line:
Status messages displaying icons and graphics.
b.
Line 1-2:
Operator data lines displaying data and variables de-
fined or chosen by the user. By pressing the [Status] key, up to
one extra line can be added.
c.
Status line:
Status messages displaying text.
The display is divided into 3 sections:
Top section (a)
shows the status when in status mode or up to 2 variables when not in
status mode and in the case of Alarm/Warning.
The number of the Active Set-up (selected as the Active Set-up in par. 0-10) is shown. When programming in another Set-up than the Active Set-up, the
number of the Set-up being programmed appears to the right in brackets.
Middle section (b)
shows up to 5 variables with related unit, regardless of status. In case of alarm/warning, the warning is shown instead of the variables.
It is possible to toggle between three status read-out displays by pressing the [Status] key.
Operating variables with different formatting are shown in each status screen - see below.
Several values or measurements can be linked to each of the displayed operating variables. The values / measurements to be displayed can be defined
via par. 0-20, 0-21, 0-22, 0-23, and 0-24, which can be accessed via [QUICK MENU], "Q3 Function Setups", "Q3-1 General Settings", "Q3-11 Display
Settings".
Automation VT Drive FC322
Instruction Manual
7 How to Operate the Frequency Converter
MG.20.U1.22
59
7