Danfoss FC322 Series, Instruction Manual, Page: 78 / 186

8.1.8 Parameter Selection
In the Main Menu mode, the parameters are divided into groups. Select
a parameter group by means of the navigation keys.
The following parameter groups are accessible:
Group no. Parameter group:
0 Operation/Display
1 Load/Motor
2 Brakes
3 References/Ramps
4 Limits/Warnings
5 Digital In/Out
6 Analog In/Out
8 Comm. and Options
9 Profibus
10 CAN Fieldbus
11 LonWorks
13 Smart Logic
14 Special Functions
15 Drive Information
16 Data Readouts
18 Data Readouts 2
20 Drive Closed Loop
21 Ext. Closed Loop
22 Application Functions
23 Time-based Functions
24 Fire Mode
25 Cascade Controller
26 Analog I/O Option MCB 109
Table 8.2: Parameter groups.
After selecting a parameter group, choose a parameter by means of the
navigation keys.
The middle section on the GLCP display shows the parameter number and
name as well as the selected parameter value.
Illustration 8.9: Display example.
8.2 Commonly Used Parameters - Explanations
8.2.1 Main Menu
The Main Menu includes all available parameters in the Automation VT Drive FC322 frequency converter.
All parameters are grouped in a logic way with a group name indicating the function of the parameter group.
All parameters are listed by name and number in the section
Parameter Options
in this Instruction Manual.
All parameters included in the Quick Menus (Q1, Q2, Q3, Q5 and Q6) can be found in the following.
Some of the most used parameters for Automation VT Drive applications are also explained in the following section.
For a detailed explanation of all parameters, please refer to the Automation VT Drive FC322 Programming Guide MG.20.W1.22.
8 How to Programme the Frequency Converter
Automation VT Drive FC322
Instruction Manual
78
MG.20.U1.22
8