![background image](http://html1.mh-extra.com/html/danfoss/ecl-2000/ecl-2000_installation-manual_3464574088.webp)
Application 10
EI.65.D4.02
82
Output Type 1
Name
Pin
Neutral
Description
P1
18
13
Circulation pump, heat circuit 1
P2
19
13
Circulation pump, heat circuit 2
M
(ON/OFF)
20
13
Motor valve on primary side of hot-water circuit. This ac-
tuator must be of a type that opens/closes upon receiving a
relay signal from the controller
M1
16, 17
13
Appl. 10A: Motor valve on primary side, heat circuit 1
16: Close. 17: Open
Appl. 10B: Mixing valve in heat circuit 1
16: Reduce temperature. 17: Increase temperature
M2
23, 24
13
Appl. 10A: Motor valve on primary side, heat circuit 2
23: Close. 24: Open
Appl. 10B: Mixing valve in heat circuit 2
23: Reduce temperature. 24: Increase temperature
Summary of Contents for ECL 2000
