General safety statement
The electric device is intended for use as a component for industrial and commercial installations.
The end product containing the electric device must conform with all related regulations.
The use of the electric device is prohibited in hazardous areas unless it is expressly designed for
such use.
The electric device is intended for installation, use and maintenance by quali ed personnel,
familiar with health and safety requirements and national legislation. Ignoring these instructions
may invalidate all applicable warranties.
These instructions must be followed to ensure safe and proper installation, operation and
maintenance of the electric device. They should be brought to the attention of anyone who
installs, operates or maintains the electric device or associated equipment.
High voltage and rotating parts can cause serious or fatal injuries. For the electric device covered
by this user guide, it is important to observe safety precautions to protect personnel from possible
injury.
Safety message signal words
Safety message signal words indicate the severity of a potential hazard.
DANGER Indicates an imminently hazardous situation which, if not avoided, will result in death or
serious injury.
WARNING Indicates a potentially hazardous situation which, if not avoided, could result in death
or serious injury.
CAUTION Indicates a potentially hazardous situation which, if not avoided, may result in minor or
moderate injury. CAUTION may also alert against unsafe practices.
NOTICE Indicates a potentially hazardous situation which, if not avoided, could result in property
damage.
Safety symbols
The following safety and information related symbols may exist in this user guide and on the
electric device.
Danger
This symbol is is identi ed by a yellow background, red octagonal band and a black STOP text. It indicates a
hazardous situation that causes severe injury or death. Action indicated by this symbol may not be executed.
General warning
This symbol is identi ed by a yellow background, black triangular band, and a black exclamation point
symbol. It indicates a general potentially hazardous situation.
Electric shock warning
The symbol is identi ed by a yellow background, black triangular band, and a black arrowhead symbol. It
indicates dangerous electric voltage that could cause an electric shock to a person.
Burn warning
The symbol is identi ed by a yellow background, black triangular band, and a black wavy lines- symbol. It
indicates a hot device that could cause burns to a person.
The symbol also indicates that the device should be placed and installed so that contact with its potentially
hot surface is not possible.
Magnet warning
The symbol is identi ed by a yellow background, black triangular band, and a black magnet symbol. It
indicates strong magnetic eld that could cause harm to a person or property.
EC-LTS1200-410
2. Safety information
| BC355449988603en-000101
©
Danfoss | Produced By: Danfoss Power Solutions | September 2020 | 7