Figure 7. Location of the mounting points
1. M8x1.25 (18 mm Deep ) 14 pcs (6 pcs on the sides, 8 pcs on the bottom)
To ful ll the mechanical and environmental standards, for example vibration and shock, it
is recommended to mount the electric device from the bottom or from the side, with at
least 6 pcs of M8 screws.
Selected mounting position must allow the cooling system to work properly. Bleed the air away
from the cooling channels to prevent air pockets.
EC-LTS1200-410
5. Installation
| BC355449988603en-000101
©
Danfoss | Produced By: Danfoss Power Solutions | September 2020 | 23