EC-C1200 DC/DC converter combined with the EC-LTS unit. LV+ and LV- can be connected, for
example, to battery and DC+ and DC- to DC-link. EC-C1200 would then control the battery
discharging and charging.
Not allowed use of the electric device
It is forbidden to use, handle, maintain and storage the electric device in following ways (including
but not limited to):
Using the electric device for other purposes than de ned in the user guide.
Disregarding the obligation to comply with the user guide, safety signs and rating plate of the
electrical device.
Using the electric device, making adjustments and maintenance without rst reading the user
guide.
Exceeding the designed limits during the operation.
Using non-original service parts of wrong material causing corrosion problems and mechanical
failures in time.
Operating and performing maintenance on the electric device without appropriate personal
protective equipment.
Using the electric device for supporting other structures or indirect movements.
Causing any kind of impact forces to the electric device (for example hitting or hammering or
dropping objects).
Operating the electric device with electric connections other than de ned in the user guide.
Operating the electric device with insufficiently tightened connections or cable glands.
Operating the electric device with power cables routed against the instructions.
Operating the electric device without properly dimensioned and operating cooling system.
Accessing the connection box(es) of the electric device, performing maintenance or
adjustment operations without securing that the electricity is disconnected and electric
device is discharged as de ned in the user guide.
Lifting the electric device with additional load attached.
Using the electric device in potentially explosive environment.
Allowing dirt or liquid to enter into the electric device or connection box.
Using cables that can't withstand the maximum current values of the electric device.
Using dirty cable lugs or broken tools.
Connecting power cables so that there is less than 10 mm air gap between the cable lug and
other metallic structure (including the braid of the cable).
Storing the electric device contrary to the guidelines presented in this user guide, for
example, outdoors in wet or dusty conditions.
Storing the electric device without proper support that prevents overturning and falling.
For product speci c and up to date information see product data sheets,
EC-LTS1200-410
3. Product overview
14 |
©
Danfoss | Produced By: Danfoss Power Solutions | September 2020
| BC355449988603en-000101