Required tools
Risk of electric shock during electrical installations. Use insulated tools.
Following tools are required to install the electric device:
Ratchet torque wrench.
Hex head wrench kit with different metric sizes.
Socket wrench kit with different metric sizes.
Cable gland tightening tool. Size according to cable glands.
Cable skinning knife.
Crimping tool for cable lugs.
For more detailed information, see appropriate chapters in this user guide and product data
sheets,
Mechanical installation
Allowed mounting position
Do not place the electric device on the ground without proper mounting or protective structure.
See an example in Figure Required customer mounting structure.
The electric device must be mounted on a at, heat- and ame-resistant mounting place (for
example on a bracket).
The electric device can be mounted in any direction. Mount the electric device permanently
from the mounting points.
Mounting points are shown in the Figure below.
EC-LTS1200-410
5. Installation
22 |
©
Danfoss | Produced By: Danfoss Power Solutions | September 2020
| BC355449988603en-000101