Operation conditions
The electric device should be used for its intended purpose only and within limits speci ed by the
manufacturer, concerning:
Loading.
Cooling.
Service interval.
Ambient conditions such as temperature and moisture.
The electric device is designed for these conditions:
Maximum altitude 4000 m above sea level.
If the operation limits are exceeded and the electric device is damaged, please contact local
Danfoss representative.
Condition monitoring during operation
Risk of permanent damage to the electric device. Use the electric device only in the ambient conditions given in this user
guide and in the data sheet.
Risk of permanent damage to the electric device. Use the electric device only if the technical guidelines given in this user
guide and in the data sheet are met.
Risk of permanent damage to the electric device. If you notice deviations from the normal operation (for example: high
temperatures or noise), stop the electric device. Find the reason for the deviation and take action to repair the
functionality of the electric device. Refer to Chapter
Temperature trip on the electric device is 155°C. Connect the three PT-100 temperature sensors to the converter.
Monitor the electric device regularly during operation to make sure of reliable operation, to
foresee possible upcoming failures and to help to reach the designed lifetime of the product.
EC-LTS1200-410
6. Operation
36 |
©
Danfoss | Produced By: Danfoss Power Solutions | September 2020
| BC355449988603en-000101