Do not touch the electric device during operation. The surface of the electric device can be hot.
This electric device is intended for professional use as complete equipment or system and as part of a xed installation.
The electric device uses high voltages and currents, and it has large amounts of stored electrical energy. Close attention
is required to system design and electrical installation to avoid hazards in either normal operation or in the event of
equipment malfunction.
The electric device can only be used in the applications it is intended for. The rated nominal values and operational
conditions are shown in the rating plate.
EC-LTS1200-410
2. Safety information
| BC355449988603en-000101
©
Danfoss | Produced By: Danfoss Power Solutions | September 2020 | 11