Dual-Band Digital Optical Repeater
DW-010-7373-08
Installation & Operation Manual -
Preliminary
Dali Wireless
Proprietary and Confidential
52
Rev: 0-2
Feb 2011
0
6.3.2 DOR Monitoring Functions
The Monitoring functions currently supported by the Repeater are as follows:
•
Channel/Carrier Frequency and digital Gain
•
DRU UL and DL Gain
•
DAU DL Input Power
•
DAU Operator, Location and Base Station ID
•
DAU Modem status (ON or OFF)
•
DAU/DRU location (long/lat) – map presentation
•
DAU/DRU Serial #
•
DAU/DRU Asset Tag
•
DAU/DRU Software revision
•
DAU/DRU PLL 1&2 lock status
•
DAU/DRU optical link status (DAU synchronized on UL path; DRU synchronized on DL path)
•
DAU/DRU Optical Loop-back
status
•
DRU LNA 1&2 status
•
DRU Delay
•
DRU UL Noise Floor Suppression Function
status (ON or OFF)
•
DRU (PA) status (ON or OFF)
•
DRU DL (PA) Temperature
•
DRU DL (PA) VSWR
•
DRU DL (PA) Output Power
•
DRU PA DC power
•
M&C Communication status – Heartbeat
•
DRU Carrier/Slot Traffic Statistics
6.3.3 DOR Alarms
Implemented DOR alarms
The Alarm functions currently supported by the Repeater are as follows:
•
DAU DL Input Low Power Alarm
•
DAU DL Input High Power Alarm
•
DAU/DRU PLL1&2 Out-of-Lock Alarm
•
DAU UL Fiber Link Failure Alarm
•
DRU DL Fiber Link Failure Alarm
•
DRU LNA 1&2 Failure Alarm
•
DRU Power Supply Failure Alarm
•
DRU DL (PA) Over Temperature Alarm
•
DRU DL (PA) High VSWR Alarm
•
DRU DL (PA) Low RF Power Alarm
•
DRU “Near maximum DL Rated Power” Alarm
•
DRU DL(PA) High RF Power Alarm (Automatic Shutdown)
•
DRU RF Shutdown Enabled Alarm
•
DRU DL (PA) Low Gain Alarm
•
M&C Communication Failure Alarm
CommScope v. Dali Wireless
IPR2020-01409
DALI WIRELESS Exhibit 2003
Page 52 of 60
