Dual-Band Digital Optical Repeater
DW-010-7373-08
Installation & Operation Manual -
Preliminary
Dali Wireless
Proprietary and Confidential
24
Rev: 0-2
Feb 2011
0
4.3.1.3 DRU Mounting On the Wall
Installation steps for DRU mounting on the wall are as follows:
1. Position support bracket (a) on the mounting surface and use pencil to mark the location of the
four mounting holes (e); or use the provided mounting template to do so.
2. Use the portable drill and 3/16” (4.7 mm) bit to drill through holes at the locations marked in Step
1.
3. Use the hammer to tap the four wall anchors (g) in the holes.
4. Line-up the support bracket’s (a) mounting holes with the anchors, and secure the bracket using
four screws and lock washers (h).
5. Position the unit so the openings located on the unit back panel, are aligned with four hooks on
the supporting bracket (a). Insert and hang the unit.
6. Secure the unit using two lock washers and screws (d) that are provided.
Figure 4-4 provides exploded view and fully mounted view of the DRU on the wall.
Figure 4-4 DRU Mounting On the Wall
CommScope v. Dali Wireless
IPR2020-01409
DALI WIRELESS Exhibit 2003
Page 24 of 60
