Dual-Band Digital Optical Repeater
DW-010-7373-08
Installation & Operation Manual -
Preliminary
Dali Wireless
Proprietary and Confidential
14
Rev: 0-2
Feb 2011
0
2.2.2.1 DRU External Interfaces
The DRU external (user) interfaces are located on the bottom of the unit and shown in Figure 2-6.
Table 2-2 provides description of the DRU external interfaces.
Table 2-2 DRU External Interfaces
Ref.
Designation
Connector Type
Description
1
O1
Sealed SC/APC simplex
optical connector
Single mode optical fiber
interface supporting up to 6
Gbps data transfer (depends on
DOR version)
2
O2
Sealed SC/APC simplex
optical connector
Second single mode optical
fiber interface that supports
daisy-chain of DRUs
3
E1
Sealed RJ45 female
connector
Communication interface for
local access to DOR network
4
Tx/Rx1
N-type female 50 ohm
Duplexed Band 1 RF interface
– DL and UL signals to/from
antenna
6
Tx/Rx2
N-type female 50 ohm
Duplexed Band 2 RF interface
– DL and UL signals to/from
antenna
8
L1
3 color LED
Green blinking: Status OK
Red blinking: Minor RF Alarm
Red solid: Major RF Alarm
Orange: Special condition
(VSWR Alarm)
L2
3 color LED
Green blinking: Status OK
Red blinking: Minor Optic Alarm
Red solid: Major Optic Alarm
Orange: Special condition
(clean optical interface)
9
AC IN
Sealed 3 pin AC power
connector
AC interface for power cord
10
GND
Ground stud
Interface for grounding unit
CommScope v. Dali Wireless
IPR2020-01409
DALI WIRELESS Exhibit 2003
Page 14 of 60
