DALBO MAXICUT 920, Manual, Page: 45 / 49

MAXICUT
Page 45
Replacement of the knife
If no crane is available, both axles on the side sections must be removed to prevent
the drum overturning.
Fig. 32
1. The machine is folded out in work
position.
2. Soil remaining (A) in between the
knife blades must be cleaned/re-
moved.
3. The protective plate is removed be-
tween the blades to get to the knife
bolts.
4. The blades can now be de-bolted
and removed.
Installation of the blades
1. The blade is installed with the new carriage bolts and are used according to the sketch
below. The arrow points forward in the direction of driving.
2. It is important to install the knives so that they rest on the knife supports and have the
screed positioned as shown in the picture below.
3. Finally, the protective plates are installed between the blades.
Fig. 33
There must be no persons within the operating radius when/if the hydraulic system
is activated.
A