DALBO MAXICUT 920, Manual, Page: 30 / 49

MAXICUT
Page 30
Driving and operating
Fig. 17
1. When filling the saw machine, use
the ladder up to the platform.
2. After use, place the ladder (A) in the
transport position and ensure that
the transport latch (B) has been
locked so that the ladder does not
flap out while driving or transporting.
It is important that the ladder up to the platform is in the transport position and
that the transport latch has been locked in all types of driving with the machine. If
not, personal injury and damage to the machine may occur.
A separate instructional book is provided for this purpose, where you can find information
about how the computer works and how to set the machine and other relevant information
about the computer and equipment.
Retrofitting
The saw equipment can be installed from the factory, but can also be retrofitted if the need
arises.
For retrofitting, a crane, truck or similar auxiliary equipment will be required.
When ordering saw equipment for retrofitting, installation instructions will be provided for the
installation of hoses, fittings, frames and hydraulics.
A
B